-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 150 mm
- Plate thickness 2.0 mm
- Kerf 3.0 mm
- Number of teeth 24
-
Made in Britain
-
Not suitable for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 180 mm
- Plate thickness 2.0 mm
- Kerf 3.0 mm
- Number of teeth 30
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 200 mm
- Plate thickness 2.0 mm
- Kerf 3.0 mm
- Number of teeth 36
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 230 mm
- Plate thickness 2.0 mm
- Kerf 3.0 mm
- Number of teeth 36
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 250 mm
- Plate thickness 2.2 mm
- Kerf 3.2 mm
- Number of teeth 40
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 300 mm
- Plate thickness 2.2 mm
- Kerf 3.2 mm
- Number of teeth 48
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 315 mm
- Plate thickness 2.2 mm
- Kerf 3.2 mm
- Number of teeth 48
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 350 mm
- Plate thickness 2.5 mm
- Kerf 3.5 mm
- Number of teeth 56
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 400 mm
- Plate thickness 2.5 mm
- Kerf 3.5 mm
- Number of teeth 60
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 450 mm
- Plate thickness 2.8 mm
- Kerf 4.0 mm
- Number of teeth 72
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 500 mm
- Plate thickness 2.8 mm
- Kerf 4.0 mm
- Number of teeth 80
-
Made in Britain
-
Not recommended for Radial Arm Crosscuts - Please see Negative Crosscut Blades
- Blade diameter 660 mm
- Plate thickness 3.2 mm
- Kerf 4.4 mm
- Number of teeth 80
There are no used machines to show for this product type.
