New Machines / Tenoner
Sedgwick TE 2 Head Tenoner
A quick and simple machine to set up with accurate operation. Work is positioned on the rolling table against an end stop and fence. The tenon width is set by raising or lowering the top motor and its position on the timber by moving both tenon heads up or down. Each head has its own idependant motor. Each head also has a provision for profile knives to enable the operator to match the cross section of the components being jointed. Stepped tenons, slayed tenons, scribed tenons, double tenons and multiple bridle are all possible on this versitile machine. Built to withstand continuous production, the Sedgwick range of tenoners are invaluble to any workshop.
| Timber Capacity | 130 x 310mm |
| Timber Capacity with Fence at 45º | 130 x 195mm |
| Maximum Length of Tenon | 155mm |
| Maximum Length of Tenon with 2 Passes | 205mm |
| Vertical Adjustment of Bottom Cutterblock | 0 - 60mm |
| Vertical Adjustment of Top Cutterblock | 0 - 120mm |
| Horizontal Adjustment of Top Cutterblock | 32mm (+/-) |
| Table Size | 800 x 310mm |
| Table Height | 860mm |
| Tenon Spindle Diameter | 30mm |
| Extraction Outlet Diameter | 2 x 150mm |
| Nett Weight | 350kg |
| Overall L x W x H | 920 x 1220 x 1350mm |
| Motor | 2 x 2.2 kW, 1 x 4 kW |
| Power | 3 phase |
Features
- Manufactured in the UK
- Each head individually powered
- Two tenon heads equipped with blocks, 4 replacement shear-cutting knives and 2 spur cutters
- Cam action work clamp
- Aluminium fence
- Mechanical readouts to the tenon positions
- Small footprint
